View Full Version : Estes Titan IIIE #2019 BT lengths
Kidagain
08-08-2009, 03:18 PM
Need some Help
I am looking for all tube length measurements on the Estes Titan IIIE #2019 in inches or mm
BT-70A - Payload Body Tube
BT-60A - Booster Tubes
BT-60B - Core Rocket Body Tube
BT-50S - Fin Mount Tubes
BT-48 - Fin Unit Body Tubes
BT-5A - Catalyst Tank Tubes
I would humbly appreiciate any help here.
genimijim
08-08-2009, 03:49 PM
Need some Help
I am looking for all tube length measurements on the Estes Titan IIIE #2019 in inches or mm
BT-70A - Payload Body Tube
BT-60A - Booster Tubes
BT-60B - Core Rocket Body Tube
BT-50S - Fin Mount Tubes
BT-48 - Fin Unit Body Tubes
BT-5A - Catalyst Tank Tubes
I would humbly appreiciate any help here.
#2019 Titan IIIE
BT-70 6.25"
BT-60 13.313"
BT-60 (2) 10.375"
BT-50S (2) 4.00"
BT-50J 2.75"
BT-950 (2) 6.25"
BT-5 (2) 3.75"
Jim
Kidagain
08-08-2009, 05:23 PM
Thanks! That was fast, but what is the BT 950 ? Did overlook a part?
genimijim
08-09-2009, 06:35 PM
Thanks! That was fast, but what is the BT 950 ? Did overlook a part?
Core Rocket Body Tube (1) BT-60
Payload Body Tube (1) BT-70
Booster Tubes (2) BT-60
Fin Unit Body Tubes (2) BT-950 These slide into the fin mount tubes
Fin Mount Tubes (2) BT-50S These are mounted into the booster tubes
Engine Mount Tube (1) BT-50J
Catalyst Tank Tubes (2) BT-5
I'm thinking this is correct without looking at the instructions, which are somewhere. :confused:
Jim
Kidagain
08-09-2009, 06:46 PM
I was thinking the inserts for the fin mounts were BT-30's. I can make it work even if I does not have the same diameter. I will use couplers if needed and fit it like the Estes Shuttle kit 1285 or make it like the Atlas Mercury fin set. Very similair.
Kidagain
08-24-2009, 07:51 PM
Thanks for all your input. I was hoping you might have the lengths for the "Plastic Conduit Strips"?
vBulletin v3.0.7, Copyright ©2000-2024, Jelsoft Enterprises Ltd.