PDA

View Full Version : New Design -- Number 3

CPMcGraw
06-01-2010, 04:59 PM
An upper-end LPR design, inspired by the Black Brant. Although meant for 24mm engines, it still puts in a good showing on the B6-4 and C6-5 18mm.

Length: 32.40"
Diameter: 1.34" (ST-13)
Fin Span: 7.17"
Weight: 2.36 oz

Simulation runs attached below. All runs work from a 36" x 1/8" standard rod.

Enjoy!
CPMcGraw
12-26-2010, 08:43 PM
Model requires two sheets.
Rocketflyer
12-26-2010, 09:18 PM
An upper-end LPR design, inspired by the Black Brant. Although meant for 24mm engines, it still puts in a good showing on the B6-4 and C6-5 18mm.

Length: 32.40"
Diameter: 1.34" (ST-13)
Fin Span: 7.17"
Weight: 2.36 oz

Simulation runs attached below. All runs work from a 36" x 1/8" standard rod.

Enjoy!

Craig, this is one Sweet and Sleek bird. :D Very impressive on the E6 motor! :eek: :chuckle: Since I don't have Rocsim, I can't access the rkt file, so I'll do some guesstimating.