SAROS parts

[CPMcGraw]

Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?

Fins? :)

[Royatl]

Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?

Fins? :)


He's definitely got the nose and reducer. the fin can can be reduced to just a couple of shrouds and the fins are an inch in span (maybe a inch and an eighth), the root is probably an inch and a quarter, and the tip is 3/4" with the trailing edge square.

[Tau Zero]

Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?BNC-20ED

http://www.semroc.com/Store/Scripts/prodView.asp?idproduct=1048


TA-2050

http://www.semroc.com/Store/Scripts/prodView.asp?idproduct=829


Fins should probably be 1/16" balsa.


Cheers,

[CPMcGraw]

Thanks, guys! I thought Carl had already put these into his alien contraption, but I couldn't remember the part numbers.

So I guess I no longer have an excuse for not building one... :o

[Mark II]

The Saros also had formed wraps, didn't it?