Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Wanted: Dead or Alive! (http://www.oldrocketforum.com/forumdisplay.php?f=15)
-   -   [WANTED] Six Pack ( Impulse Aerospace, Rocket Vision, Rugged Rockets ) (http://www.oldrocketforum.com/showthread.php?t=16390)

dhbarr 12-21-2016 03:40 PM

[FOUND] Six Pack ( Impulse Aerospace, Rocket Vision, Rugged Rockets )
 
I'm looking for one of these, dead or alive. I have the .rkt from EMRR which gets me in the ballpark.

If you have one ( destroyed , built, open, new ) drop me a PM. I'm particularly interested in verifying the tubefin measurements and/or comparing your instruction sheet with the two I have.

Cheers,
-dh.

dhbarr 02-07-2017 09:58 PM

Quarterly Poke.

jetlag 02-07-2017 10:07 PM

I have one. I built it around 1993-4 I think. PM me and tell me what you need. I'm not sure I still have the instructions, though I'll look for them.
It is indeed a rugged rocket! Just about bulletproof. Use epoxy, 30 minute, and you'll be pleased!

Allen

dhbarr 02-07-2017 10:11 PM

Long side of the fins, short side of the fins, tube thickness, ID, OD, as many pics as you can stand?

I'd like to downclone to 29mm MD on BMS 52H tubing, assuming I can find a suitable NC.

dhbarr 02-11-2017 12:14 AM

From Elsewhere:

Body Tube: https://www.mcmaster.com/#8527k144/=169rzw7
Nose Cone Design: http://www.thingiverse.com/thing:2095927

ID = 1.0"
OD = 1.125"
L = 10.0"

NC = 4.25"

Root = 2.0"
Tip = 1.25"

I think a cut-up Go Devil 29 will be just right!


All times are GMT -5. The time now is 03:09 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.