Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   Wanted: Dead or Alive! (http://www.oldrocketforum.com/forumdisplay.php?f=15)
-   -   Rokitflite USS Odyssey Instruction CD and Decals (http://www.oldrocketforum.com/showthread.php?t=16943)

Kidagain 11-11-2017 07:45 PM

Rokitflite USS Odyssey Instruction CD and Decals
 
Hi all,

Looking for the Rokitflite USS Odyssey CD or another form of the instructions. I see EMRR lists all the parts. I am also looking for a scanned decal sheet.

Thanks,

rraeford 01-30-2018 12:44 PM

Did you ever get a response on this?

Kidagain 01-30-2018 09:48 PM

Yes I did. A fine YORF member contacted me and posted this:

https://user.xmission.com/~huxley/r...yssey/index.htm

The member created a PDF from the CD instructions he had on hand from the kit creator, Scott Branche

I am still looking for the cast resin parts. I think I found some 3D printed parts to substitute some of cast parts.

Tango Pappa is making the decals.

I started construction 2 weeks ago, taking my time.

Thanks for following up.

hcmbanjo 01-31-2018 08:28 AM

Those resin parts were probably molded from the MPC plastic parts,
like what you'd receive in the Taurus kit.

rraeford 01-31-2018 11:05 AM

Did this pdf file also include patterns for fins, tube sizes and lengths, etc?
Also, in the early years of Quest they offered that plastic parts tree for sale. I have one somewhere.

Kidagain 01-31-2018 11:10 AM

Really? Let me know if you are willing to let them go?

jdbectec 01-31-2018 11:49 AM

Quote:
Originally Posted by rraeford
Did this pdf file also include patterns for fins, tube sizes and lengths, etc?
Also, in the early years of Quest they offered that plastic parts tree for sale. I have one somewhere.


I'm sure I've got one or two Also. I'll take a look around.

Kidagain 01-31-2018 11:38 PM

The PDF did include an inventory and measurements of parts

A Fish Named Wallyum 01-31-2018 11:52 PM

Quote:
Originally Posted by hcmbanjo
Those resin parts were probably molded from the MPC plastic parts,
like what you'd receive in the Taurus kit.

I just finished my Taurus build and I only used the small nose cones and nozzles from the plastic parts sprue. I just flew the Taurus in December, so they couldn't have migrated too far. I'll check when I get home.

Kidagain 02-01-2018 12:09 AM

1 Attachment(s)
looking for the RCS and the 2 ullage engines. The small radio/radar dishes and what looks like Pitot tubes.


All times are GMT -5. The time now is 08:13 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.