Estes F-22 B/G question.
 

I'm getting ready to epoxy the twin rudders onto the airframe of an Estes F-22 B/G.

The question is: I don't know which way the little bevel goes--to the front or to the rear. The instructions don't quite show.

Thanks!

Jeff

The real one doesn't have it at either end. I would imagine it goes to the front since it is recessed in a slot and would disappear. That way, the correct angle is maintained above the fuselage, yet you get a squared slot with more surface mating for glue to hold better.

Links because the first two images are really big.
http://upload.wikimedia.org/wikiped...Raptor_JSOH.jpg
http://www.amazingtoptens.com/wp-co...2014/04/116.jpg
http://upload.wikimedia.org/wikiped...assembling1.jpg

Thanks! That makes sense.

I'll check my kit.