Ye Olde Rocket Forum

Ye Olde Rocket Forum (http://www.oldrocketforum.com/index.php)
-   RockSim Asylum (http://www.oldrocketforum.com/forumdisplay.php?f=24)
-   -   Two part recovery (http://www.oldrocketforum.com/showthread.php?t=14465)

mikemech 11-06-2014 05:26 PM

Two part recovery
 
2 Attachment(s)
Trying to help the local high school design a TARC rocket. So, I design a couple quickies. Helps if I know what I’m talking about.

Apparently I do not know what I’m talking about.
The first design (TARC 15) simmed O.K. The second (TARC 15 24mm) does not.
The rocket is designed as a two stage because the payload bay (egg and altimeter) must return separate from the booster. There is a motor tube in the second stage (required) but no motor.
TARC 15 24mm doesn’t know that there is a parachute attached.
The only difference I can see is that the bulkhead in TARC 15 is shown as owned by the payload tube and the transition in TARC 15 24mm is owned by the sustainer. I cannot get the transition to be owned by the payload tube. I don’t know if this is part of the problem or not.
Can anyone point to my error, or know a way to work this?


Also posted on TRF

mikemech 11-07-2014 07:40 PM

Found it in Peak of Flight #65


All times are GMT -5. The time now is 05:38 AM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.