New Semroc Parts
 

Parts to make a classy egg capsule or Boostervision carrier, thanks to Doug Sams for suggestion!
BC-1834 Cineroc Balsa Nose Cone
ST-1844 Cineroc Body Tube
BR-60-18 Cineroc Balsa Adapter to BT-60

Thanks to John Brohm, we have most of the BT-52 tubes and cones.
BNC-52AG Balsa Nose Cone Estes K-39 Semi-Scale Saturn 5
BNC-52G Balsa Nose Cone Thor-Agena B and SPEV

Some interesting new cones:
BC-17590 Balsa Nose Cone Upscale of BC-1051 Old Semroc NC-413
BC-515E Balsa Nose Cone used on Centuri Mini-Dactyl no cat#
BNC-60Y Balsa Nose Cone Upscale of BNC-50Y
BNC-55EX Balsa Nose Cone of PNC-55EX Estes Exocet and Neptune
BC-846 Balsa Nose Cone of Centuri PNC-89 Groove Tube, MX-774, Long Tom, Photon Probe, Jayhawk
BC-15081 Upscale of PNC-89 SLS Long Tom?
BC-20045 Coaster Dyna-Soar Nose Cone for LT-200


There are many more. I need a better way of getting the new releases organized!

Putting them to good use
 

(winking and nudging) Hey, Bill. SLS 175% Groove Tube. :eek: :cool:

And SLS Starfire. (uncontrollable drooling) :D


Cheers,

Yeah! More Parts!
 

Yeah! More Parts! :D

Hint, Hint, :rolleyes: Would like to see an upscale of the BC-760 (Jay's Tau) to a BC -13--
and I just discovered the BC-523 cone and an upscale of it would be great too.

Thanks Carl and best wishes at NARCON 2007. I hope to go to the 50th next year no matter where it is, Lord willing.

James Pierson
NAR# 77907

I just may have to build an Astron Omega with a Phoney Cineroc on board now....

No need for it to be phoney. Slap in a camera and transmitter.

Carl,

Do you have the Thor-Agena B BT-52 balsa adapter as well? A Thor-Agena B kit would be very cool also. ;)

Now THAT would be cool! (As I stare at the Starfire kit I had Lee & Betty sign for me at NARCON 2006.) :D

Oh....now you go and do all of that after I buy a lathe and teach myself how to use it! :mad:

Just kidding....now everybody else can have fun like me and Sandman, without all the balsa dust to deal with. ;)

Hey Scott;

Both the Thor-Agena and the SPEV use the TA-5260C; Carl shows it on his list, only with a status of "Back Ordered". It will be interesting to see whether Semroc will kit the Thor-Agena, and whether the same scheme for the clear plastic fin assembly will be used. The same kitting question can also be asked for the K-39 Semi-Scale Saturn V, now that the balsa nose for this kit is available.

Should Carl also decide to kit the Colonial Viper, then Semroc would have all four kits in play that incorporated BT-52 as part of the model.

The original Estes Gemini-Titan with the two-motor cluster used the slip fit clear plastic fins as well. I'd like to see that come out down the road, too.