Show and Tell , Newest Project, OddRocs
2 Attachment(s)
OK So I've been feeling nostalgic for the southwest lately since that was where I grew up. That is why I built the wagon wheel. Also Can you guess which scifi television show that i have been binge watching lately ?
I really do believe that Foam-core is a very under utilized material for building odd rocs and science fiction based model rockets. It is incredibly cheap, and light , For the last 3 projects i have used less than 1 full sheet apiece from the DOLLAR store. |
Stargate SG-1 :cool:
|
Jaffa! Cree!
|
Quote:
|
I only had 1 opportunity to laser cut foam core, and it didn't include any time to tweak the cutting speed and intensity. It does cut great, but the foam between the card stock shrinks back from the heat of the laser leaving a noticeable concave space, almost an eighth of an inch deep.
|
Quote:
So that might promote gluing on something like this. Please disregard that this particular part is cylindrical not flat. Jerry |
I suppose it does provide a space for glue to be, but I'm used to using elmers which shrinks. That extra space would be good for epoxy, but that would be overkill, for this light cheap material.
|
1 Attachment(s)
Here's another cardstock odd-rocket, C1-10P, aka Chopper from Star Wars Rebels.
I found the template on paper-replika.com and put in an 18mm engine mount. Removable fin units will be made to insert into the bottom of the feet similar to the old Estes R2-D2. |
Nice C1-10P. I've done a couple of simple paper rockets and my son built several including a rather large Little Joe II with a dowel framed escape tower. I've never done any complex paper rockets like that.
|
2 Attachment(s)
The body and head are fairly easy, the legs and feet have lots of little details on them, most challenging paper model I have built. I have to do the R2-D2 now. Here are the fin units, kind of used a fin shape similar to an X-wing... Yes, those are 13mm tubes, and no, I do not plan on clustering, hopefully this will get high enough to open a chute on a C6-3 before hitting the ground.
|
All times are GMT -5. The time now is 04:15 PM. |
Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.