03-21-2018, 11:28 PM
|
Master Modeler
|
|
Join Date: Jul 2006
Posts: 2,261
|
|
I had some free time to work on my Crusader today and she is ready for paint. The first thing I had to do was free the parts from the die cut balsa sheets and do my best to sand to shape. The plans then have you apply sanding sealer so I used 3 coats of Brodak balsa sealer. The 1/8 play that is inserted into the wing is a tad thicker than the 1/8 balsa requiring sanding. The plans are pretty good with the measurements and everything fits nice and loose. I am finishing applying all the fillets with white glue and I am waiting on my Krylon Acryli Quick to arrive. The plans call for light gray so I am going with Pewter Gray since that is the lightest gray. I was going to use Gloss white but I think the light gray will look better, that is what people use for the Enterprise and model jet liners. I am not going to use any primer to keep the weight down, just shoot the top coat and apply the decals. The weight of the glider is 1.5oz ready for paint. All and all a fun challenging build especially without laser cutting.
|