Thread: Ejection charge
View Single Post
Old 05-22-2015, 12:34 PM
mikemech mikemech is offline
Old Fart with Rockets
Join Date: Oct 2012
Location: Belleville, Illinois
Posts: 154
Default Ejection charge

I'm building a rear ejection rocket, 24mm MMT in a BT-80 airframe. The motor tube is 300mm long and the airframe tube is 310mm long. The front of the motor tube butts against a bulkhead. The front centering ring is 30mm from the front of the motor tube.
I need to find out if the ejection charges on LPR BP motors are all the same. During ejection testing do I need to use 24mm motors or can I use far cheaper A8-3s?
Also posted in TRF.
Clear skies and fair winds,

NAR 31689
Reply With Quote