09-29-2018, 04:51 PM
|
 |
Old Submariner
|
|
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,772
|
|
Fitting the engine mount into the 3D printed boat tail.
I first sand the mounting places of the boat tail with 220 to give it some grip for the epoxy. The 24 MM engine mount that I've assembled is a nice slip-fit into the boat tail and registers beautifully! I've used mid-cure epoxy for the adhesive.
I then add the wood centering ring to the protrusion of the engine mount tube and epoxy it also.
TBC
__________________
Never trust an atom. They make up everything.
4 out of 3 people struggle with math.
Chemically, alcohol IS a solution.
NAR# 94042
SAM# 0078
|