04-24-2018, 03:53 PM
|
Master Modeler
|
|
Join Date: Jul 2006
Posts: 2,276
|
|
Pretty fast build, the fins are sealed with 3 coats of Brodak sealer and I am currenly adding the fillets, picture to follow. Tomorrow I will apply the Gloss white followed by orange. In the mean time I did find a good use for my old Vacuum former, works great as a downdraft table for dust. I will also post this in the technique section. Pretty basic, attach vacuum hose and sand away. Sucks the balsa part on the board and there is no dust, I was sanding inside for the first time. I also tried it with scrap balsa covered with Elmers wood filler, worked great.
|