02-07-2017, 08:31 PM
|
 |
Craftsman
|
|
Join Date: Feb 2009
Posts: 463
|
|
Thank you.
For mine I used
3 34" long bms bt-50h foil lined tubes
1 Orbital Interceptor(cone, chute, two 2" tubes, motor mount and frilly bits
2 2" estes psII nose cones
2 bt-50 nose cone packs, I used similar cones on the same ends of the tubes.
Some basswood or 1/8" ply for fins, shaped line interceptor tail fins, sized as desired.
I only vented the ejection charge through one of the tubes, and used three 1/4" aluminum tube bushings to route the gasses through the tubes and lock the tubes together mechanically and seal the holes. That was it. It's about 22 oz rtf, flies nice to about 500' on F-35's or F-39's, 5 second delay or could use a 6 grain cti motor(I left off the motor hook and thrust ring. Cost was around $60 total.
Frank
Quote:
|
Originally Posted by LeeR
Frank,
I think I saw that amongst your various posts about your RC rocket gliders. Very attractive. I may have to get a Trajector kit or two to bash into something similar.
And I really need to finish the upscaled OT.
|
|