01-31-2014, 09:46 AM
|
 |
Retired Missile Technician
|
|
Join Date: Mar 2005
Location: Fort Worth, TX
Posts: 1,079
|
|
Jim,
I hope the pictures are useful. The pulley was injection molded. Diameter is 1.0", grooves measured at 0.877 or about 7/8" in diameter, overall height is 0.658 with a shaft height of 0.451. Shaft diameter is 0.186 or about 3/16". All measurements by a digital readout micrometer and are +or - about 0.002" over several measurements.
Chas
__________________
Charles Russell, MSgt,USAF (ret.)
NAR 9790, Lvl 1
SAM "Balls Three"
|