View Single Post
  #5  
Old 12-05-2013, 11:38 AM
dvmanning's Avatar
dvmanning dvmanning is offline
Advanced Rocketeer SAM# 0455
 
Join Date: Nov 2012
Location: Sparta, Missouri
Posts: 112
Smile Completed Barcode Exeter Shuttle Concept Model

The model was a fun build, but I did change a few things:
1 The .020 Styrene plastic that was suggested in the drawings for the air intakes , kept breaking down the center. After making several sets of the parts, I decided to try something else. I ended up cutting a #BT20 Body tube in half and transferring the cowling pattern to it. It worked much better.
2. When I glued the BT20 halves to the side of the main tube, I used rubber bands to hold them in place. When I came back to the model to continue working on it, I discovered that the force of the rubber bands had pulled the center in creating a concave shape. See attached image of build.

Have a background in aeronautical technology and having been a modeler for many years,, I decided to leave it be and see how it would affect the flight. I am almost 65 this month. [IMG]

David
SAM # 0455
Reply With Quote