View Single Post
  #4  
Old 08-29-2014, 05:01 PM
dvmanning's Avatar
dvmanning dvmanning is offline
Advanced Rocketeer SAM# 0455
 
Join Date: Nov 2012
Location: Sparta, Missouri
Posts: 112
Default

Quote:
Originally Posted by Ez2cDave
How about including the tube lengths and Nose Cone length, so this may be properly cloned ?
All parts lengths and other measurements can be accessed on the Semroc site by typing the Part # in the box and clicking the view box. Part D, Part G and the decals are no longer available from Semroc. I have located a nosecone that is 1/2 inch longer and Balsa Tube coupler from another source. My Semroc order was shipped this morning for the available parts. I think the artwork for the decals can be accessed on the RocSim Software.

Parts List
A 2 Body Tubes ........................ ST-1690
B 7 Body Tubes ......................... ST-790
C 1 Body Tube ........................... ST-3630
D 1 Balsa Nose Cone ................. BC-1631
E 3 Balsa Nose Cones ............... BC-714
F 1 Laser Cut Fin Set ................. FV-29
G 1 Balsa Tube Coupler ............ BTC-16
H 1 Launch Lug ......................... LL-122
I 1 Screw Eye ............................ SE-10
J 2 Elastic Cord ........................ EC-124
K 1 Kevlar Thread..................... SCK-24
L 3 Plastic Parachutes ............. RC-12
M 3 Tape Discs ........................... TD-6
N 3 Shroud Lines ...................... SLT-6
O 1 Wood Dowel ....................... WD-39
P 7 Thrust Rings ....................... TR-7
Q 1 Plug Set ............................... IKV-29P
R 1 Decal ................................... DKV-29
S 1 Empty Casing ..................... MC-727
T 1 Glue Applicator .................. GA-1
__________________
David Manning
SAM # 0455
Reply With Quote