View Single Post
  #9  
Old 03-16-2018, 08:18 AM
blackshire's Avatar
blackshire blackshire is offline
Master Modeler
 
Join Date: Jan 2009
Location: Fairbanks, Alaska
Posts: 6,507
Default

I certainly wouldn't encourage you to give up on the clear nose tip. There are clear (diisocyanate) polyurethane casting resins (the Por-A-Kast [originally made by SynAir Corporation] product line included--and may still--a clear resin, and PolyTek, Ciba-Geigy, and Alumilite [and/or other manufacturers] may offer clear casting resins). There are also epoxy casting resins, and clear ones may be available. Bare-Metal Foil also carries numerous resins and RTV mold-making rubber formulations. You could use the nose cone itself to create the nose tip mold, and the nose cone--or a shallow, hardened "pour" of resin poured into another nose cone of the same type, then removed--could (after being sprayed with a wax-based mold release compound) be used as the inner window mold plug.
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see:
http://www.lulu.com/content/paperba...an-form/8075185
http://www.lulu.com/product/cd/what...of-2%29/6122050
http://www.lulu.com/product/cd/what...of-2%29/6126511
All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com.
NAR #54895 SR
Reply With Quote