02-17-2019, 08:29 PM
|
BAR 13790
|
|
Join Date: May 2008
Location: Johnson City, NY
Posts: 525
|
|
I got to do some work this weekend
First, I cut the 1/2" x 2.5" slot in the third pod and motor section. Epoxied the tubes together. You can see the gap with just a 1/2" wide port vs. the 3/4" called out. I used a 1/8" dowel epoxied between the tubes to seal the gap. (need to grab a picture of it)
Started cutting ports on the tops of the pods and passenger pod. I've done them all 1/2" x 3"
|