01-31-2014, 01:34 PM
|
|
Seagulls Beware...
|
|
Join Date: Apr 2013
Location: Subject to Change
Posts: 930
|
|
Thanks!
Quote:
Originally Posted by Chas Russell
Jim,
I hope the pictures are useful. The pulley was injection molded. Diameter is 1.0", grooves measured at 0.877 or about 7/8" in diameter, overall height is 0.658 with a shaft height of 0.451. Shaft diameter is 0.186 or about 3/16". All measurements by a digital readout micrometer and are +or - about 0.002" over several measurements.
Chas
|
Hi Chas,
Thanks for the Info! Yes, they're useful. I've forwarded that info on to the guy with the 3D printer (Landru).
All The Best!
Jim
__________________
.
.
Dreaming of making the rockets I dreamed of as a kid (and then some).
"The Guide says there is an art to flying", said Ford, "or rather a knack."
"The knack lies in learning how to throw yourself at the ground and miss."
Launching is Optional... Landing? That Depends on Trees.
|