View Single Post
  #7  
Old 09-13-2006, 07:10 PM
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 6,472
Default

Quote:
Originally Posted by Green Dragon
Mine is a semi-clone ( opened kit that sat for years, tube and cone used elsewhere, later built it up using a 'guestimated' tube length from the catalog ( this being prior to Jim Z or YORP ), and measuring it now I was very close since I used a 12.625" tube length .
I believe I used the original kit dowels, as I apparently had these 8 the same length, plus original decals, etc.

If anyone has a built-up , please measure and let us know ( or if you have an unbuilt, even better ) .

I have the plans online here:

http://www.oldrocketplans.com/estes/est1375/est1375.htm

Just look at the model # for the tube you want a measurement on then go here for the length:

http://www.ninfinger.org/~sven/rockets/body_tubes.html

Bob, I do have the regular Scorpius decals online, I just thought I'd offer the alternative decal you made as well. Thanks for sending it to me.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558
Reply With Quote