02-06-2012, 11:17 PM
|
 |
BARCLONE Rocketry
|
|
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
|
|
New Design - Rocket 872
A design similar to 871, but not quite the same...
The main structural elements of the fins are 1/8" hardwood dowels. The rear support pylon passes through the paper transition and attaches to the ST-7180 tube hidden underneath. The outrigger fins are 3/32" balsa, while both pylons are 1/8" balsa. The cooling fins are 0.05" matteboard.
Recovery is a 16" chute. A 12" chute is too small; the fins would take a beating. You might even want to try a 20" chute if the recovery field is large enough.
Length: 30.78"
Diameter: 2.04" (Transition #2)
Fin Span: 5.76"
Weight: 2 oz
B4-4......334'......Dv < 11 FPS......Requires 27"
B6-4......342'......Dv < 8 FPS.......Requires 29"
C6-5......816'......Dv < 3 FPS.......Requires 28"
The A8-3 is not recommended.
Share & Enjoy!
|