Ye Olde Rocket Forum - View Single Post - Thrustline Aerospace Duster Plans

Scott,

Attached below is the data for the Thrustline Aerospace Duster from the RockSim File

TLA Duster Parts
Nose cone Estes - Estes - PNC-55AC, Material: Polystyrene PS Nose shape: Hollow Ogive, Len: 5.4030 In., Dia: 1.3250 In. Wall thickness: 0.1250 In. Body insert: OD: 1.2000 In., Len: 0.5000 In.

Screw Eye FlisKits - SE-M - Screw Eye - Medium, Mass: 0.0350 Oz.

Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3248 In. , ID: 1.2830 In. , Len: 17.0000 In.

Kevlar Shock Cord - Custom, Material: 70 Lb. kevlar Mass: 0.0098 Oz

Elastic Shock Cord - Custom, Material: 1/4 In. flat elastic Mass: 0.1207 Oz.

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 18.0000 In., Spill hole: 0.0000 In. Mass: 0.1881 Oz.

Tube coupler - Custom, Material: Paper Tube coupler OD: 1.2830 In., Hole #1: : 30.8000 In. Len: 2.0000 In. Location: 15.9961 In. From the front of Body tube

Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3248 In. , ID: 1.2830 In. , Len: 17.0000 In., Mass: 0.9436 Oz.

Engine tube Estes - EST 3086 - BT-50, Material: Paper OD: 0.9760 In. , ID: 0.9500 In. , Len: 2.7559 In. Location: 14.2402 In. From the front of Body tube

Engine block - Custom, Material: Paper Engine blockOD: 0.9500 In., Hole #1: : 18.8800 In. Len: 0.2500 In. Location: 0.0000 In. From the front of Engine tube

Engine hook Estes - Engine hook - Standard size, Mass: 0.0494 Oz.

Centering Ring - Custom, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9760 In., Len: 0.0594 In. Location: 0.5000 In. From the base of Body tube

Centering Ring - Custom, Material: Paper Centering ringOD: 1.2830 In., ID: 0.9760 In., Len: 0.0594 In. Location: 2.5059 In. From the base of Body tube

Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 0.6309 In., Loc: 16.3772 In. CG: 0.3155 In.

Launch lug Estes - ESTES 2321 - LL-1/8, Material: paper OD: 0.1250 In., ID: 0.1125 In., Len: 0.6309 In., Loc: 4.2350 In. CG: 0.3155 In.

Custom Fin set - Forward - 3 fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
177.8, 0.
206.238553719008, 41.2
163.752592975207, 21.41
0., 0.

Custom Fin set - Aft - 3fins Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
142.456680655306, 0.
58.37, 45.95
32.3873805309734, 45.95
0., 0.