06-11-2018, 09:15 PM
|
|
Master Modeler
|
|
Join Date: Jan 2009
Location: Fairbanks, Alaska
Posts: 6,507
|
|
Quote:
Originally Posted by BARGeezer
That's OK, never mind. I see on Ninfinger's site the Phoenix Bird's dimensions are in the 1978 Centuri catalog. Same diameter, just slightly shorter than the Enerjet 1340. Can I pester you with a couple of questions? How do you intend to replicate that part? 3D printed plastic or balsa coupler, perhaps? And are you going to add the tiny strakes to the Eliminator fins, or leave as is? Do you have a scan of the original decals? Or will you be using the Estes version? Appreciate your feedback.
|
I apologize for the delayed reply; either YORF or my ISP does some kind of "system house-keeping" late at night, which makes it impossible to open YORF to read or post anything. I wouldn't be making the tubing connectors myself. I was just gathering information (on my own) for another YORF member who might--but might not--be interested in 3D printing them. The Eliminator (see: http://www.amazon.com/Estes-1950-El...t/dp/B0007UDS84 ) appears to have the little forward fin strakes.
|