View Single Post
  #153  
Old 01-06-2019, 01:29 PM
MarkB.'s Avatar
MarkB. MarkB. is offline
Surfrajettes Fan
 
Join Date: Feb 2008
Location: El Paso
Posts: 1,113
Default

Off-Topic Comrades:


Done! (Well, mostly)

Attached are the images. The first is the the rocket all in primer. I went with Duplicolor Black Primer on the tube and nose with a minimal amount of overspray on the fins focusing on the repaired area. My experience is red plastic is extremely hard to paint over without getting bleed-thru. This is critical for the white nose but I decided a little red bleeding through the copper on the fin unit wasn't necessarily bad. The primer helped seal up the water-damaged body tube pretty well.

No outdoor picture because it's raining on-and-off and the lighting is bad but the second picture is the final. Colors are Rustoleum spray Copper, Camo Deep Forest Green and Flat White in the alternate Nike-Smoke scheme. The scheme works well for this model with its pronounced fin can. The nose was tricky to mask but it worked out.

The parachute needs a little more work, but that's all the rocket needs to be ready for launch. The kids want to go launch so maybe by the end of the month.
Attached Thumbnails
Click image for larger version

Name:  DSC_0065[1].jpg
Views: 69
Size:  1.09 MB  Click image for larger version

Name:  DSC_0067[1].jpg
Views: 93
Size:  1.07 MB  
__________________
NAR 79743
NARTrek Silver
I miss being SAM 062

Awaiting First Launch: Too numerous to count
Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard
Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774
On the Bench: 2650;
Dream Stage: 1/39.37 R-7
Reply With Quote