10-16-2017, 09:59 PM
|
|
Retired with Way Too Many Kits
|
|
Join Date: Jun 2007
Location: Colorado
Posts: 3,222
|
|
It’s a reeeeeally short shoulder. Just like the old Estes balsa adapters! 😀
It fits extremely well, and since the payload section is short, I may leave it. On the old Estes balsa adapters, I’ve fixed in a couple of ways — a coupler section glued onto the shoulder, or my favorite, several dowels glued into holes drilled into the shoulder, with the edge of hole at the shoulder’s edge. Less friction. Requires drilling holes for dowels on a drill press unless you are really good holding a hand drill. On a shoulder that is BT-70 sized, I used four 3/8” dowels.
__________________
Lee Reep
NAR 55948
Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp
|