#1
|
|||
|
|||
Securing A Motor Mount
What's the best way to secure a 29mm motor mount in a body tube designed for a 38mm motor?
|
#2
|
||||
|
||||
Permanently- Epoxy
Temporary Use- Friction-fit with masking tape.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#3
|
|||
|
|||
Quote:
Will the ejection charge of an "H" motor blow out a motor mount secured with masking tape? |
#4
|
||||
|
||||
Not if it's friction fitted properly.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|