#11
|
||||
|
||||
Ok, using my rather inadequate photo reconnaissance skills, I pulled the following measurements off of the picture... Root= 1.125" Tip= 1" Span= 1.5"
Does that seem about right?
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
#12
|
||||
|
||||
Thanks, but I might have figured it out close enough.....maybe...
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
#13
|
||||
|
||||
Upon further review (and having checked out some more pics) I think the fins are closer to:
Root= 1.375 Tip= 1.0625 Span= 1.625 Does this seem close?
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
#14
|
||||
|
||||
Using a caliper on the Kadet below,:
Span: 1.583 LE/TE:1.593 Tip:0.99 Root:1.244 Two of the four fins have a tiny uptic at the tips, see the picture The .99 was measured on those fins. |
#15
|
||||
|
||||
THANK YOU!
Actually, I'm pretty impressed at how close I came from the pictures, lol! This helps tons!
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
#16
|
||||
|
||||
Glad to help, there has so much misinformation about these. You did get close. Beware when cloning,the fin can bulges in the middle so don't use the span if you are making a template to glue on a bt-50, just box it out with edges.
|
#17
|
||||
|
||||
Good to know! Thanks again!
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
Thread Tools | Search this Thread |
Display Modes | |
|
|