#1
|
||||
|
||||
Estes Astro Bee #1356 - Layout finished
All,
as promised, I did a fin trace on my assembled Astro Bee kit. However, I didn't want to just throw something half-baked out there, so I created a full-scale build sheet in PowerPoint. You should be able to clone directly from the sheet. I re-created the decals as best I could. I can't attach the file here, so e-mail or PM me for a copy. You really must use the .ppt file to get the proper resolution. Here's a screenshot to give you an idea... Please let me know if you have questions or comments. Later, EV |
#2
|
||||
|
||||
Here's a RKT file (zipped) and a 3D image for the AstroBee. These use EV's fin tracing, measurements, and decal scan to create the plan and image.
Thanks, EV! Craig |
#3
|
||||
|
||||
Quote:
Craig, a little Oops on your image.... the NOAA logo is backwards. Later, EV |
#4
|
||||
|
||||
Quote:
Didn't even notice it! Thanks... Craig... |
#5
|
||||
|
||||
...Bump...
Craig, if you really, really want an original, there's one up on ROL right now. http://www.rocketryonline.com/cgi-b...kets&1126759988 Later, EV |
Thread Tools | Search this Thread |
Display Modes | |
|
|