|
#1
|
|||
|
|||
Bt70lite, use or get standard tube
some time back I bought some bt-70 airframe tubes from Apogee. I finally found a use for it...it turns out that Apogee doesn't sell bt70 with the standard wall thickness of 0.021", what they sell has a thickness of approx. 0.017". I was thinking to build a 3x upscale of the Estes Hi-flyer for 24mm motors( Es and small Fs). now I'm wondering if I should buy a new tube instead of using the thin wall stuff I have on hand. my current design file attached. thoughts appreciated, thanks
Rex |
#2
|
||||
|
||||
Tubing sounds lousy.
I'd scrap it and use real stuff, especially with F power of any sort.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|