#1
|
|||
|
|||
Ejection charge
I'm building a rear ejection rocket, 24mm MMT in a BT-80 airframe. The motor tube is 300mm long and the airframe tube is 310mm long. The front of the motor tube butts against a bulkhead. The front centering ring is 30mm from the front of the motor tube.
I need to find out if the ejection charges on LPR BP motors are all the same. During ejection testing do I need to use 24mm motors or can I use far cheaper A8-3s? Also posted in TRF.
__________________
Clear skies and fair winds, Mike NAR 31689 |
Thread Tools | Search this Thread |
Display Modes | |
|
|