|
|
Thread Tools | Search this Thread | Display Modes |
#11
|
||||
|
||||
Quote:
Jerry |
#12
|
|||
|
|||
I’m not sure what you mean by that. I was told by them that they didn’t do any custom work at all. I asked specifically about the Vincia. Can you clarify?
Last edited by rraeford : 05-30-2019 at 10:09 AM. |
#13
|
||||
|
||||
Please note the "EDIT" below. Thank you.
Quote:
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#14
|
||||
|
||||
I have attached a RockSim file I made for the Vincia rocket. This was a very difficult one to simulate because of the shape of the fins. However, when I print out the fin template it is pretty close to the shape of the fin template in the original article. The simulation indicates that the 3oz of nose weight might not be necessary and that the altitude on a flight with an E30 motor might not be as high as the article in Sport Rocketry indicated.
__________________
Bruce S. Levison, NAR #69055 |
#15
|
|||
|
|||
Here are some pics I took at the NAR 60th Anniversary Rocketeer Reunion last August. This was a Len Fehskens tribute display that included an original Vincia and a kit.
__________________
Just remember...G. Harry Stine's first ever model rocket was an RTF ! Check out my wonderful model rocketry blog here: https://castlerocketeer.blogspot.com/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|