#1
|
||||
|
||||
Open Rocket... Creating standoff's for launch lugs?
I'm futzing around with Open Rocket for the first time, and I need to know how I can create standoff's for the LL's. The payload section has a greater diameter than the body of the rocket, and the launch rod would be hitting it. I can't figure out how to virtually "mount" the LL's and solve this problem.
Thanks! K'Tesh
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
#2
|
||||
|
||||
Use a trapezoidal fin set of one to create the standoff. To get the launch lug itself about the right distance out I actually attached it to the payload tube, but used the position offset to put it in the right place.
Example attached....
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#3
|
||||
|
||||
Brilliant!!!
Quote:
That worked BEAUTIFULLY!!! Thanks!
__________________
. . Dreaming of making the rockets I dreamed of as a kid (and then some). "The Guide says there is an art to flying", said Ford, "or rather a knack." "The knack lies in learning how to throw yourself at the ground and miss." Launching is Optional... Landing? That Depends on Trees. |
Thread Tools | Search this Thread |
Display Modes | |
|
|