#1
|
||||
|
||||
SEMROC Engine Mounts
I've created a set of 18mm engine mounts that you can use for your projects. They now look like they should, with a simulated engine hook, and with reasonably close colors for the components. The mounts are created as "PODS", so they are only usable with RS9. Simply copy the pod in one instance of RS, and paste it into your project (in a second instance). You can now easily reposition the mount as a single component.
EM78, 79, and 10 use thick (0.25") centering rings. EM-711, 13, 16, 18, and 20 use matteboard (0.05") rings. 13mm and 24mm mounts in the works.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Here are the 13mm engine mounts, from EM-57 to EM-513...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
And now the 24mm mounts, from EM-913S and EM-913L to EM-920S and EM-20L (Short and Long)...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#4
|
|||
|
|||
Thanks!
Wow, looks like Craig has been busy. Cool, Thanks Craig.
James Pierson NAR#77907 |
Thread Tools | Search this Thread |
Display Modes | |
|
|