Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Doctor is In! > Ask the Doctor
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-07-2017, 09:42 PM
Bituminous Bituminous is offline
Junior Rocketeer
 
Join Date: Jul 2017
Posts: 5
Exclamation Here is why I might try my Estes Saturn V on a D12-0 ... help

Hi Folks. This is my first time posting.

The big question is will a D12-0 booster have enough "oompph" to eject the 'chutes??

I will lay out the scenario with data and supporting video. All of these shots in the vidoes were with D12-3 motors

(#1) Beautiful first flight before paint and decal. 448 g (15-3/4 oz) with engine
https://youtu.be/ZQ4WOqvZe5Y

(#2) Not so great flight after paint and decal. 456 g (16-1/8 oz) with engine
https://youtu.be/sS_xpEk-9HU

(#3) Even worse. Shaved off 4g down to 452 g (16 oz) with engine
https://youtu.be/bPoxUuf8MMk

(#4) Made some measurements, estimations and calculations and determined the Cg was too close to the Cp. So I added a weight into the nose. 490 g (17-1/4 oz) with engine. Cg around 17 inches from base. Cp estimated to be 13.4 inches from base. Slightly better flight.
https://youtu.be/AZapV6Vs1qw

Based on #4, it looks like apogee is right when burn is done so I was thinking a D12-0 would minimize the amount of drift back down before ejection.....the catch though is the D12-0 would have to have enough force to eject the 'chute and nose stage.

Thoughts?

I am debating about holding the rocket in my hand and firing to see if it will eject in a low-er risk environment, but that would probably violate some sort of NAR code. How can I fix it in place such as on my sawhorse without messing up the finish?
Reply With Quote
  #2  
Old 07-07-2017, 10:09 PM
Doug Sams's Avatar
Doug Sams Doug Sams is offline
Old Far...er...Rocketeer
 
Join Date: Mar 2005
Location: Plano, TX resident since 1998.
Posts: 3,965
Default

Quote:
Originally Posted by Bituminous
Based on #4, it looks like apogee is right when burn is done so I was thinking a D12-0 would minimize the amount of drift back down before ejection.....the catch though is the D12-0 would have to have enough force to eject the 'chute and nose stage.
E15-4. That's the motor everyone espoused many years ago. I still have one I bought back in 2000 for the Saturn-V kit I also bought that year. The kit has never been started, but if I ever git'er'done , I'll have the motor for it


Quote:
I am debating about holding the rocket in my hand and firing to see if it will eject in a low-er risk environment, but that would probably violate some sort of NAR code.
Don't do that. It's potentially dangerous - you could get burned. You'd feel awful if it went awry.


Quote:
How can I fix it in place such as on my sawhorse without messing up the finish?
Buy another launch rod - ie, a steel rod from the hardware store - and mount it to the sawhorse, then slide the rocket over it. Then put a clamp on the rod just above the launch lug. I have a small pair of Vise-grips that would be a perfect clamp Make sure the blast won't hit anything - rig a deflector if you need to.

HTH.

Doug

.
__________________
YORF member #11
Reply With Quote
  #3  
Old 07-07-2017, 10:36 PM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 11,610
Default

I don't know how you built it, but it is way too heavy. I can fly on D12-3's all day with no problems. Since it is so heavy, you only have one solution without modifying the rocket. Fly it on composite motors. Aerotech makes E15-4 and E20-4 single use motors and E18-4 reloadables that will overcome the added weight. Doug didn't specify, but he means the Aerotech motor I'm talking about. Estes used to make an E15 but they were very prone to CATO and were longer than the D12 casing.

That said, build another one with considerably less glue so you can fly it in those same small field locations on a D12-3.
__________________
I love sanding.
Reply With Quote
  #4  
Old 07-07-2017, 10:50 PM
Bituminous Bituminous is offline
Junior Rocketeer
 
Join Date: Jul 2017
Posts: 5
Default

Doug Sams - great suggestion. I can mock that up real easy and safe. Thank you. I'll repor back with results
Reply With Quote
  #5  
Old 07-07-2017, 11:03 PM
Bituminous Bituminous is offline
Junior Rocketeer
 
Join Date: Jul 2017
Posts: 5
Default

tbzep - I confess I did glue the $%{+ out of it. I used those molding oldies aftermarket nose and farings that added weight but strength. lesson indeed learned.

I'd use an E engine in a heartbeat but when I look at the launches (see videos themselves if you like) I'd be concerned it'd still be unstable. I did my best on the Cp-Cg thing

Think I might have to simply retire it on the shelf...if this D12-0 scheme does not work

Thanks
Reply With Quote
  #6  
Old 07-08-2017, 12:15 AM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 11,610
Default

Quote:
Originally Posted by Bituminous
tbzep - I confess I did glue the $%{+ out of it. I used those molding oldies aftermarket nose and farings that added weight but strength. lesson indeed learned.

I'd use an E engine in a heartbeat but when I look at the launches (see videos themselves if you like) I'd be concerned it'd still be unstable. I did my best on the Cp-Cg thing

Think I might have to simply retire it on the shelf...if this D12-0 scheme does not work

Thanks

The E15 will stomp the heck out of it compared to a D12. You can add all the nose weight you need to get the CG where it needs to be and it will still jump off the pad. You will need a decent size field compared to the D12, though. Unless it means something special to you, fly it on those composites when you have a big enough field. Build another one completely stock to fly on D12-3's on small fields. It makes a great demo, pretty much coasting to a stop and ejecting the chutes at apogee when flown in calm conditions. If you want to get a little creative, build it with a removable mount and play around with 18mm clusters. It can be flown on 4 B6-2's, 3 C6-3's, or 4 C6-5's with great results. Each cluster listed is slightly more powerful than the previous, giving you the ability to fine tune your model for the field size.
__________________
I love sanding.
Reply With Quote
  #7  
Old 07-08-2017, 01:13 AM
SEL's Avatar
SEL SEL is offline
Officially Middle-Aged Rocketeer
 
Join Date: Mar 2005
Location: Portland, OR
Posts: 1,356
Default

Quote:
Originally Posted by Bituminous
tbzep - I confess I did glue the $%{+ out of it. I used those molding oldies aftermarket nose and farings that added weight but strength. lesson indeed learned.

I'd use an E engine in a heartbeat but when I look at the launches (see videos themselves if you like) I'd be concerned it'd still be unstable. I did my best on the Cp-Cg thing

Think I might have to simply retire it on the shelf...if this D12-0 scheme does not work

Thanks


The one thing no one has mentioned here is do NOT use a D12-0! There is no ejection charge in -0 motors - they are meant to be used in the lower stage of multi-staged rockets only.
__________________
SAM #0031
Reply With Quote
  #8  
Old 07-08-2017, 09:48 AM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,780
Default

I always flew mine with a cluster of 2 or 3 D12-3 hanging out the back of the primary motor mount. You could simply piston launch it With a D12-3. With a D12-0, add about 1/2g 3F BP.

Jerry

cite:

http://v-serv.com/usr/kits/pistonlaunchedmicroc.htm
Reply With Quote
  #9  
Old 07-08-2017, 10:29 AM
Newbomb Turk's Avatar
Newbomb Turk Newbomb Turk is offline
Consigliere to Bill E.'s BP Mafia
 
Join Date: Oct 2012
Location: Florida
Posts: 581
Default

I was thinking the same thing SEL was: no ejection charge. How could that possibly work?
__________________
Just completed: Estes Cherokee-E, Estes Multi-Roc.

Current project: Painting the roll pattern on my new Ventris build, gifted me by the estimable Dr. Houchin.
Reply With Quote
  #10  
Old 07-08-2017, 10:36 AM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 11,610
Default

Quote:
Originally Posted by Newbomb Turk
I was thinking the same thing SEL was: no ejection charge. How could that possibly work?

It will eject to some extent, but it won't forcefully enough to have successful recovery on all models. Bob Kaplow used zero delay in SuperRoc before it was quickly outlawed. I wouldn't try it on a model that I spent a lot of time making look good.

Remember that the propellant breaks through before all of it is burned. Hot gases and small bits of BP blow forward to ignite the upper stage. This can sometimes create enough pressure to blow a nosecone, but sometimes it isn't enough to get the recovery system to follow. Centuri's Pass-port staging system was designed to vent the pressure so it wouldn't pop stages apart before ignition.
__________________
I love sanding.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 05:19 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024