#1
|
||||
|
||||
Some of you have already noticed...
... that I have started going back and working up "Krell Ray" templates for some of the older designs so that Carl doesn't have to do anything more than feed his machine. I hope to have quite a few of these done before the end of 2011. While I know the RockSim files can generate a cutting pattern for those who don't mind using a steel straight-edge and a fresh #11 blade, having a full-blown fin sheet pattern would certainly make it easier for others to build these designs.
Hope everyone finds this to their liking!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Nice! So, if one wanted to get the fins cut, they d/l the file and send to Carl to get laser cut? Or will you be sending the bunch to him so he has it already when people order the fin set from him?
__________________
Jon SAM #0396 BAR 02/07 NAR 86940 KF4GUL Aim high, fly straight! |
#3
|
||||
|
||||
Quote:
Carl knows!
__________________
Carl McLawhorn NAR#4717 L2 semroc.com |
#4
|
||||
|
||||
Quote:
You're already two steps behind Carl if you go that route! It's just like his packing and shipping - he has your order filled and in the mail before you hit the "send" button...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|