Need some Help

I am looking for all tube length measurements on the Estes Titan IIIE #2019 in inches or mm

BT-70A - Payload Body Tube

BT-60A - Booster Tubes

BT-60B - Core Rocket Body Tube

BT-50S - Fin Mount Tubes

BT-48 - Fin Unit Body Tubes

BT-5A - Catalyst Tank Tubes

I would humbly appreiciate any help here.

__________________
NAR # 91740SR
C.R.A.S.H. - NAR Section #482
SAM Member #0153

"I said Lunch, not Launch!"

- Far Out Space Nuts

#2019 Titan IIIE

BT-70 6.25"
BT-60 13.313"
BT-60 (2) 10.375"
BT-50S (2) 4.00"
BT-50J 2.75"
BT-950 (2) 6.25"
BT-5 (2) 3.75"



Jim

Thanks! That was fast, but what is the BT 950 ? Did overlook a part?

__________________
NAR # 91740SR
C.R.A.S.H. - NAR Section #482
SAM Member #0153

"I said Lunch, not Launch!"

- Far Out Space Nuts

Core Rocket Body Tube (1) BT-60
Payload Body Tube (1) BT-70
Booster Tubes (2) BT-60
Fin Unit Body Tubes (2) BT-950 These slide into the fin mount tubes
Fin Mount Tubes (2) BT-50S These are mounted into the booster tubes
Engine Mount Tube (1) BT-50J
Catalyst Tank Tubes (2) BT-5

I'm thinking this is correct without looking at the instructions, which are somewhere.


Jim

I was thinking the inserts for the fin mounts were BT-30's. I can make it work even if I does not have the same diameter. I will use couplers if needed and fit it like the Estes Shuttle kit 1285 or make it like the Atlas Mercury fin set. Very similair.

__________________
NAR # 91740SR
C.R.A.S.H. - NAR Section #482
SAM Member #0153

"I said Lunch, not Launch!"

- Far Out Space Nuts

Thanks for all your input. I was hoping you might have the lengths for the "Plastic Conduit Strips"?

__________________
NAR # 91740SR
C.R.A.S.H. - NAR Section #482
SAM Member #0153

"I said Lunch, not Launch!"

- Far Out Space Nuts