#1
|
||||
|
||||
Estes Scout Ship Nova Information Needed
Does anybody have the length of the "wing" root edge from the Estes Scout Ship Nova kit?
Kit #1392. I got the instructions and fin tracings from oldrocketplans.com, http://www.oldrocketplans.com/estes...t_Ship_Nova.pdf The fin tracings at the bottom of the PDF don't have a inch reference. The fins have been cut out but seem large. Any help is appreciated!
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
#2
|
||||
|
||||
If the overhang of the "secondary engine tube" (part G) on it's standoff is the same on each end, then standoff should be 2 inches long.
It looks like from page 5 of the pdf that it's not, maybe a .25" overhang at the front, so 2.5" for the standoff might be more correct. kj |
Thread Tools | Search this Thread |
Display Modes | |
|
|