#1
|
||||
|
||||
Wolverine RC RG
I wanted to do a slightly different take on my Mach 10 based Mach 2 RC Rocket glider, but do a few changes based on what I had learned while kitting that model. I wanted to use a longer, smaller 3" tube, move the wing to the middle of the tube and drop the T tail and make it look more like the old estes Wolverine rocket that I loved as a kid. With the wing through the middle of the tube, I was able to get rid of the keel I had on the Mach 2 since the servos were up higher, and I was able to offset the rail buttons so that they weren't on the bottom. I had Mark at stickershock scale up a portion his wolverine decals and add the speed brakes and canopy from my Mach 2 kit. Wingspan is 32", weight is right at 10.75 oz rtf. Not sure when I can maiden it since we just had a cold snap.
Frank |
#2
|
||||
|
||||
Well it was 35 degrees and windy, but got three flights in. cg was perfect, needed about
1/8" of downtrim for boost but otherwise very nice flying model, handled the wind nicely. Frank |
#3
|
||||
|
||||
Frank, no videos this time?
Joe |
#4
|
||||
|
||||
Joe, not yet, I have to wait for one of my kids to be free, my wife has a hard time with the video camera, it isn't easy, maybe Saturday...
Frank |
#5
|
||||
|
||||
Here is a video I made assembling the second prototype so you can see how easily it goes together.
https://www.youtube.com/watch?v=tbXZbADmVy4 |
#6
|
||||
|
||||
Here's the video from this morning, it was raining a bit, buy my daughter held the umbrella and video taped and I flew, second flight, I had a bit too much tape holding the igniter in and it yanked the controller wires with it for the first 20 feet
https://www.youtube.com/watch?v=lNI6g908GvY |
#7
|
||||
|
||||
Frank, really nice. What were the long burn engines that you used?
|
#8
|
||||
|
||||
The motors are the Aerotech 24mm e-6rc motor, an endburning blue thunder, I carry them.
Frank |
Thread Tools | Search this Thread |
Display Modes | |
|
|