Hi folks,
I recently won this decal set of Ebay so I could clone the rocket on the front. There was a fairly long thread devoted to its creation here, but for the life of me, I cannot find it.
Would one of you be so kind as to point it out to me?

Many thanks!

Allen

Attached Thumbnails

 

The name of the thread is Estes Black Rocket 'HyperAstro'.

That's it! I knew it was a long thread...

Thank-You, Scott! That was FAST!

http://www.oldrocketforum.com/showt...ight=hyperastro

When I build it, I'll post here.

Allen

OK,
I've reread the entire thread. I have a fix on everything except the fin dimensions which someone said they would post to the Designer Studio. I cannot find it there.
I know the root edge is about 6.75 inches, at least for the 'wings,' not the rudder fin?
Looks like Daniel used a 14 inch BT?

Allen

Sorry, I just found this.

BT is 12" and a BT-60
Let me find the fins.
Do you have Rocsim?

Daniel

__________________
If it flies, I can crash it!

Did Gordon ever get a scan of those?


Bill

__________________
It is well past time to Drill, Baby, Drill!

If your June, July, August and September was like this, you might just hate summer too...

Please unload your question before you ask it unless you have a concealed harry permit.

: countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ;

Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding...

How do you plan to attach the wing pods?

Daniel

__________________
If it flies, I can crash it!

No, Daniel, I do not have Rocsim.
Is it possible to make them into a PDF for a BT-60 ?
I plan to, most likely, cut out the wings for the pods. Since I'll use epoxy there, the wing ought to stay reasonably strong then.

I had to look up the original thread, too. Was there any change made to the RockSim file after the V5.0 post ( #61 )? If not, I can whip up a laser burn pattern from the SVG images and post them here.

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Craig,

Go for it, save me the trouble of scanning and posting.

Daniel

__________________
If it flies, I can crash it!