Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > The Golden Age of Model Rocketry > Model Rocket History
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Closed Thread
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-16-2009, 07:47 PM
Initiator001 Initiator001 is offline
Too Many Initiators is Never Enough
 
Join Date: Mar 2005
Location: San Diego, CA
Posts: 2,394
Default Motors and Motor Development

Mike,

When I worked at Enertek for Lee Piester in 1987-88, I discovered a box of random rocket motors in the office closet.

One of the motors was a bare fiberglass casing with graphite nozzle. It was labeled "Dorffler G Motor".

All I have been able to find out about it was that it was made in the mid/late 1970s and that it might have used leftover Enerjet motor components.

I was wondering if you could provide me with some history about this motor.

Thank you.

Bob Sanford
Attached Thumbnails
Click image for larger version

Name:  Dorffler G Motor.jpg
Views: 212
Size:  24.0 KB  Click image for larger version

Name:  Dorffler G Motor Aft-Nozzle End.jpg
Views: 186
Size:  28.7 KB  Click image for larger version

Name:  Dorffler G Motor Forward End.jpg
Views: 184
Size:  29.7 KB  Click image for larger version

Name:  Dorffler G Motor Case Markings.jpg
Views: 183
Size:  25.4 KB  
Reply With Quote
  #2  
Old 04-17-2009, 09:30 PM
MDorffler MDorffler is offline
Craftsman
 
Join Date: Apr 2009
Location: Canon City, CO
Posts: 100
Default

Quote:
Originally Posted by Initiator001
Mike,

When I worked at Enertek for Lee Piester in 1987-88, I discovered a box of random rocket motors in the office closet.

One of the motors was a bare fiberglass casing with graphite nozzle. It was labeled "Dorffler G Motor".

All I have been able to find out about it was that it was made in the mid/late 1970s and that it might have used leftover Enerjet motor components.

I was wondering if you could provide me with some history about this motor.

Thank you.

Bob Sanford


Bob - ya know, the more I read the questions here, I'm beginning to learn where all my missing stuff got to! How in the world did my motor protos end up at Centuri I ask? And then I learn Bob Kaplow has at least one of Ed and my 'Brown-Dorffler' motors. You guys collectively have have more of my stuff than I do! Geeezo.

Anyway, Ed and I never had an approved budget in our earliest work with composite motors. We made motors and propellant from what we could essentially find laying around. After Enerjet ceased operations the remaining casings, nozzles, head enclosures, and other stuff was shipped and stored at the Estes plant. Well, Ed and I made an effort hide most of it so it wouldn't somehow be destroyed. In affect we stole it and moved it to an area where nobody would find it.

We must have had well over 1,000 of both E and F fiberglass casings and more than enough nozzles, both graphite and phenolic, to almost go into motor production.

We started making clones of the Enerjets as the fastest way to get on a learning curve. First we made them in the same way Irv Wait did, then we developed our own techniques. The motor you have is one of many of those learning curve motors we made. Then as we took each part or process as far as we could, we chinked over to another aspect of motor design.

One of the coolest things about one of those Enerjet motors was that they lit up like a flashbulb right at burnout. The propellant was loaded into the casing without a liner, which meant that it came i n direct contact with inside of the casing wall. And because they burned outward from the cenetr core, the flame head contacted the case wall at the end of the burn. And if you got a little careless and didn't get the propellant loaded just right you could end up with a ring of fire on the inside of the casing right at the front of the nozzle face as well as at the head enclosure.

Ed and I worked with many propellants over the years. Loading the double-based motors taught me well not to ignore wearing rubber gloves handling the proellant. On one occasion I got one of the biggest headaches I had ever had because I didn't think holding onto a grain bare-handed for a minute or so would be that big a deal. Wrong.
Reply With Quote
  #3  
Old 04-18-2009, 12:11 PM
Initiator001 Initiator001 is offline
Too Many Initiators is Never Enough
 
Join Date: Mar 2005
Location: San Diego, CA
Posts: 2,394
Default

Mike,

Thanks for the information about the motor I found.

A few more motor questions:

1) In 1994, Estes released a new E2X kit called the Manta (Parasite B/G). I bought one and the packaging/box listed C10 motors for use with this model. Also, I heard of a C4 motor around the same time. What happened to these two motors?

2) The 1993 catalog introduces the Pro Series Terrier/Sandhawk and Jayhawk scale models. The motor listings for these two kits refer to E15 & E30 motors. Was this E15 the black powder motor which was released? What about the E30 motor?

3) At several hobby shows in the early 1990s, I saw a sign announcing that Estes would have composite motors. This was many years before North Coast Rocketry and the F62 motor. I have attached a picture of the sign. What is the story behind the product mentioned on the sign?

Thanks for your time and I look forward to your answers.

Bob Sanford
Attached Thumbnails
Click image for larger version

Name:  Estes Pro Composites.jpg
Views: 217
Size:  23.6 KB  
Reply With Quote
  #4  
Old 04-18-2009, 12:47 PM
Jerry Irvine's Avatar
Jerry Irvine Jerry Irvine is offline
Freeform rocketry advocate.
 
Join Date: Jan 2008
Location: Claremont, CA "The intellectual capitol of the world."-WSJ
Posts: 3,780
Default

The D12 is a detuned D13. The E9 is a detuned E15. The E30 and the D20 I saw fly in person were never released but a bunch of prototypes were made. The detuning of motors are done because BP motors continue to cure after shipping and performance varies quite a bit with temperature and humidity. The D13 had a fairly high failure rate in the west but not so much in the south and east.

I am not subject to Estes NDA. The Pro series ended up being released as clustered 24mm rockets.

The F62 internal geometry was an exact copy of the U. S. Rockets F40/F80. As such, one grain is an E, two an F, and three a shippable G. It appears Estes tried to get CPSC to accept G's, and when not, they were not released even though DOT and NAR certified already.

Jerry
Reply With Quote
  #5  
Old 04-18-2009, 12:56 PM
Royatl's Avatar
Royatl Royatl is offline
SPEV/Orion wrangler
 
Join Date: Mar 2005
Location: Atlanta, GA
Posts: 2,645
Default

Quote:
Originally Posted by Jerry Irvine
The D12 is a detuned D13.
...
The D13 had a fairly high failure rate in the west but not so much in the south and east.


Oh, the D13 definitely had a high failure rate in the South too! I have film!
__________________
Roy
nar12605
Reply With Quote
  #6  
Old 04-18-2009, 01:19 PM
MDorffler MDorffler is offline
Craftsman
 
Join Date: Apr 2009
Location: Canon City, CO
Posts: 100
Default

Quote:
Originally Posted by Jerry Irvine
The D12 is a detuned D13. The E9 is a detuned E15. The E30 and the D20 I saw fly in person were never released but a bunch of prototypes were made. The detuning of motors are done because BP motors continue to cure after shipping and performance varies quite a bit with temperature and humidity. The D13 had a fairly high failure rate in the west but not so much in the south and east.

I am not subject to Estes NDA. The Pro series ended up being released as clustered 24mm rockets.

The F62 internal geometry was an exact copy of the U. S. Rockets F40/F80. As such, one grain is an E, two an F, and three a shippable G. It appears Estes tried to get CPSC to accept G's, and when not, they were not released even though DOT and NAR certified already.

Jerry


Sorry Jerry, as the primary designer of the F62 I can tell you most assuradly I did not copy any U.S. Rockets motors, or any one else's for that matter. The internal ballistics of the 'Smokey Sam' propellant dicatated the internal grain geometry just as all propellants do.
Reply With Quote
  #7  
Old 04-18-2009, 05:16 PM
shockwaveriderz shockwaveriderz is offline
rocket dinosaur
 
Join Date: Mar 2005
Location: My Old Kentucky Home
Posts: 1,184
Default

Mike. what do you think of a BP re-loadable.

I understand that there would be at least 1 initial detriments:

CPSC would not recognize this as a model rocket because of the metal casing; therefore only adults could purchase and use. Ok so Estes makes a product for adult only.


It sems to me that Estes could use its current investemnet in its Mabel technologies:

you just press a propellant grain/delay/smoke train/ejection charge/clay containg cap into a smaller length and diameter paper casing.

Using a metal casing would allow you to burn the BP propellant at much higher chamber pressures resulting in much higher Isp's.

Nozzles could be single use or multi-use perhaps and replaceable.

looking forward to your responses.

terry dean



what advantages/disadvantages pros/cons do you see to such a product?
__________________
"Old Rocketeer's don't die; they just go OOP".....unless you 3D print them.
Reply With Quote
  #8  
Old 04-18-2009, 06:31 PM
MDorffler MDorffler is offline
Craftsman
 
Join Date: Apr 2009
Location: Canon City, CO
Posts: 100
Default

Quote:
Originally Posted by shockwaveriderz
Mike. what do you think of a BP re-loadable.

I understand that there would be at least 1 initial detriments:

CPSC would not recognize this as a model rocket because of the metal casing; therefore only adults could purchase and use. Ok so Estes makes a product for adult only.


It sems to me that Estes could use its current investemnet in its Mabel technologies:

you just press a propellant grain/delay/smoke train/ejection charge/clay containg cap into a smaller length and diameter paper casing.

Using a metal casing would allow you to burn the BP propellant at much higher chamber pressures resulting in much higher Isp's.

Nozzles could be single use or multi-use perhaps and replaceable.

looking forward to your responses.



terry dean



what advantages/disadvantages pros/cons do you see to such a product?


Terry - first of all pressed black powder only increases a couple clicks in ISP by increasing the chamber pressure to as much as 1,000 psi.. You might get lucky to get ~95 out of it at those pressures. Estes BP motors run typcally down around ~80 ISP at 50psi. Black powder as a propellant for re-loadables simply does not merit the effort. This was the whole purpose for introducing the composites with ISPs typically in the ~180 range into model rocketery.

Then there is the problem of pressing the re-loadable BP grains. It would be a mess. You would either press into a very thin tube to act as the exterior inhibiror, or press into a solid un-inhibeted grain. The latter is going to burn on all surfaces making it a high thrust short burn motor. The inhibeted grain will be an end-burner with either one or both ends burning. Remember, BP burns right at 1" per second no matter the chanber pressure, so you can get out your calculator to see that the options you have for grain design versus burn time is very limited. And then consider having these solid grains of BP rolling around in your flight box. A 1" diameter uninhibited grain is going to totally burn in .5 second if you accidently light it up. A typical AP composite grain will burn at .25" per second with the exterior almost always inhibeted. You'll have a far greater time getting out of the way of a burning composite grain than the BP grain. Give that some thought.

Next, I would estimate that to press re-loadable BP grains would end up to be very nearly the same cost as pressing an entire motor. And then you need to now purchase and maintain the re-loadable metallic casings to drop them into. Black powder is a terrible corrosive burning propellant. Have you noticed how nasty and ugly your blast delector gets from using BP motors? That's what it will do to the inside of your metallics. And the exhaust is also very abrasive. While a black powder motor is running, the internal gas flow is chewing out the paper just in front of the clay nozzle. That's what will happen over time in a re-loadable casing unless you also drop in a heavy liner.

Terry - there are in my opinion simply no pros in opting for a re-loadable BP motor. There are far more design and manufacturing issues than with the composites. Sorry.
Reply With Quote
  #9  
Old 04-18-2009, 07:00 PM
shockwaveriderz shockwaveriderz is offline
rocket dinosaur
 
Join Date: Mar 2005
Location: My Old Kentucky Home
Posts: 1,184
Default

ok fair enough. Mike. Do you or Can you foresee a day when the majority of Estes engines are made with composite propellants?


terry dean
__________________
"Old Rocketeer's don't die; they just go OOP".....unless you 3D print them.
Reply With Quote
  #10  
Old 04-18-2009, 07:17 PM
Bazookadale's Avatar
Bazookadale Bazookadale is offline
I wish I was a spaceman!
 
Join Date: Jan 2006
Location: Elizabethtown,PA
Posts: 431
Default

Quote:
Originally Posted by MDorffler
Sorry Jerry, as the primary designer of the F62 I can tell you most assuradly I did not copy any U.S. Rockets motors, or any one else's for that matter. The internal ballistics of the 'Smokey Sam' propellant dicatated the internal grain geometry just as all propellants do.



Mike - the world needs F62 Darkstars! - OK I need F62 Darkstars! It is the finest model rocket motor ever, you need to find someway of bringing it back.
__________________
Did the chicken really cross the road, or did the
road move beneath the chicken? Albert Einstein

You Can't break the laws of physics but they can break you. Christine McKinley


Dale Greene

Mentor, Penn Manor Rocket Club

VISIT SPAAR
2010 Calder Cup
The Old West
2009 Calder Cup

" Speaking the Truth in times of universal deceit is a revolutionary act. " George Orwell
Reply With Quote
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 06:17 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024