#1
|
||||
|
||||
New Design (Sorta new...) -- Cherokee-E
This is a 1.24X upscale of the Cherokee-D, long-body, for use with the new Estes E12-6 engine. Good numbers, especially on the Dv. A bit high on the D12-5, but flyable.
Length: 27.04" Diameter: 1.637" (BT-60) Fin Span: 7.74" Weight: 2.87 oz D12-5......1014'......Dv 19 FPS......Requires 32" of a 48" x 1/4" rod E12-6......1560'......Dv 7 FPS.......Requires 32" of a 48" x 1/4" rod Share and Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Quote:
Doug .
__________________
YORF member #11 |
#3
|
||||
|
||||
Quote:
Probably, but Carl can cut a balsa cone that matches it correctly, and it would be the same cone for a CC-Express upscale as well... I might try the AH to see what the differences would be, flight-wise.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|