#1
|
||||
|
||||
Upscale Design -- SLS Nova
From 2007, this was a design using ST-10, and needed CPT-10 for the payload section. Needless to say, we're still waiting for a good source of CPT-10, and unless we get a source for CPT-16, I don't expect this one to get any, either...
The styling is similar to the Nomad, but uses a set of five fins just to be different. A new NC, the BC-1684, is needed. This is a 1.6X upscale of the BC-1052. Length: 35.10" Diameter: 1.64" (ST-16) Fin Span: 5.64" Weight: 3.42 oz E12-6......1258'......Dv 20 FPS......Requires 33" of a 48" x 1/4" rod......Avg of six runs Share and Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Quote:
Fluorescent tube protector is a suitable standin for PST-60, so it suffices for CPT-16 as well. Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
#3
|
||||
|
||||
Quote:
The Delta Syx from Red River Rocketry has a clear payload section which is slightly larger than an ST-10 in size. I never asked John where he gets them. Bill
__________________
It is well past time to Drill, Baby, Drill! If your June, July, August and September was like this, you might just hate summer too... Please unload your question before you ask it unless you have a concealed harry permit. : countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ; Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding... |
#4
|
||||
|
||||
Quote:
I know -- I've got an 8' length in my stash. Problem is, depending on where you get it, it's not the same diameter. It varies from store-to-store (varies by distributor).
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#5
|
||||
|
||||
Quote:
Doug .
__________________
YORF member #11 |
#6
|
||||
|
||||
Quote:
I bought some in BT-50 and BT-20 sizes from a local pet shop. It's sold as "uplift tubes" for under-gravel filters. Haven't looked in quite some time, but the stuff is much thicker than "normal" payload tubing. Worked well, though...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|