This is a 1.24X upscale of the Cherokee-D, long-body, for use with the new Estes E12-6 engine. Good numbers, especially on the Dv. A bit high on the D12-5, but flyable.

Length: 27.04"
Diameter: 1.637" (BT-60)
Fin Span: 7.74"
Weight: 2.87 oz


D12-5......1014'......Dv 19 FPS......Requires 32" of a 48" x 1/4" rod
E12-6......1560'......Dv 7 FPS.......Requires 32" of a 48" x 1/4" rod


Share and Enjoy!

Attached Thumbnails

   

Attached Files

Cherokee-E.rkt (118.5 KB, 24 views)

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Ya know, the Omega nosecone (PNC-60AH?) might make a decent cone for this upscale. And, for purists, you can always cadge up a paper or cardstock cone to make the end more pointy (ala TLP kits).

Doug

.

__________________
YORF member #11

Probably, but Carl can cut a balsa cone that matches it correctly, and it would be the same cone for a CC-Express upscale as well...

I might try the AH to see what the differences would be, flight-wise.

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635