#1
|
||||
|
||||
New Design -- Pterodactyl Mini
This is an 85% reduced size version of the E12 version. The flight numbers are even better!
Length: 30.30" Diameter: 0.998" (ST-9) Fin Span: 6.95" Weight: 1.58 oz A8-3......165'......Dv 12 FPS......Requires 30" of a 36" x 1/8" rod......Avg of six runs B4-4......405'......Dv 4 FPS.......Requires 23" of a 36" x 1/8" rod......Avg of six runs B6-4......412'......Dv 3 FPS.......Requires 26" of a 36" x 1/8" rod......Avg of six runs C6-5......888'......Dv 3 FPS.......Requires 26" of a 36" x 1/8" rod......Avg of six runs Simplified construction, compared to the larger sibling. Share and Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Fin Cutting Patterns
Here are the laser patterns for the main fins and the smaller detail fins. The main fins are 3/32" balsa, and the detail fins are 0.05" matteboard.
Unzip this file to get two Corel Draw 10 CDR files.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
Minor Revisions
Noticed two issues in the first RKT file that need to be corrected:
No changes in the flight numbers. Share and Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|