#1
|
||||
|
||||
Fun with old rockets
Pete Alway and I had a really fun time today poking around some old rockets.
First up, the Model Missiles Aerobee Hi starter kit. We looked through everything but Pete got the idea to dry fit the die-cut fins on the convolute wound BT-40. |
#2
|
||||
|
||||
Next up was comparing the original MMI kit to the Quest re-issue from 10 years ago. Turns out it was incredibly accurate.
Cover art appears very similar. Fin size was exactly the same. Decals, fonts were very similar but repros were missing the stencil lines. Body tubes and nosecones very similar. Original on left (rubber nosecone), repro on right. Balsa cone was ever so slightly shorter than the rubber cone. |
#3
|
||||
|
||||
Next up we looked through an old box of rocket parts someone sent Pete years ago.
With lots of online poking around we realized most of the parts were from the 1962/63 catalogs. Red plastic 4 corner parachutes with the same large size tape discs as the original MMI parachutes. Found these in the 1962 catalog parts special listings (3 parachutes, 12 tape disks). Also found payload compartment from what appeared to be an 1963 catalog Apogee rocket. Lots of fun. |
#4
|
||||
|
||||
After poking around the old rockets we had lots of fun going through the old negative pages from Scaled Model Rocketry and Retro rockets.
They no longer use this technology to print books so Pete's publisher let him know they were going to throw out the old negatives. Pete picked them up years ago and set them aside. We had a blast going through them. Honestly, they reminded me of the cells from old Disney movies. Just truly beautiful works of art. All in all, a really fun afternoon. |
#5
|
||||
|
||||
Steve,
Sounds like a fun visit! I have very fond memories of visiting Peter in the 90s. I was on a business trip to Detroit, contacted Peter, and drove out to Ann Arbor to meet him. We only knew each other from emails and interactions on r.m.r. We talked rockets, went to dinner and talked rockets, and stayed up incredibly late talking rockets. I also got to see many of his models, but was thrilled to see (and hold!) his beautiful Saturn 1 SA-5 scratch-built model, the one on the cover of The Art of Scale Model Rocketry. I have a signed copy of that book, and still desire to build one. My wife and I drove to NSL-2018 in Geneseo, and had a chance opportunity to catch up with Peter (and got a signed copy of his newest V-2 booklet, of course). Somewhere I have a picture of Peter and me at his booth, posing with a couple of his little V-2s (sporting a couple paint schemes from the new book). I feel fortunate to have spent some time with one of the legends in our great hobby.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#6
|
|||
|
|||
Bill Spadafora and I were working sport range duty together at one of the Cincinnati NARAMs years back. Peter was the LCO, so we made him an honorary Bill for the shift.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Design Contest F-150 Hurricane Estes - Low Boom SST Semroc - Gee'Hod, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Solar Sailer II Semroc Cyber III Ready to fly: Estes - Multi-Roc, Solar Sailer II Semroc - Earmark, Snake Jumper |
#7
|
|||
|
|||
Steve, thanks for sharing the photos in these posts, great stuff for sure !
__________________
Jim Filler NARHAMS # 139 NAR CB - RCPC |
#8
|
|||
|
|||
Steve, as you could probably guess, I love this stuff.
__________________
Rick Randol NAR #28062, ROCI Section #625 http://www.newwayspacemodels.com http://www.indyrockets.org NewWay Space Models-We Cornered Model Rocketry |
#9
|
||||
|
||||
Hi Steve,
Thanks for posting the pictures, interesting to compare the two kits. Question for you - What is the thickness of the fins? I have a more recent Semroc Aerobee Hi kit and the fins are 1/8" thick. Maybe I'm too used to 3/32" thick fins, but the kit fins just look clumsy!
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
#10
|
||||
|
||||
Chris,
Fin thickness is 3/32. Photo below is of the actual die-cut sheet which just happens to include the relevant info, LOL. Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|