#31
|
|||
|
|||
BC-715CN now at Semroc!
Hey All, look what I found at Semroc .
BC-715CN Link: http://www.semroc.com/Store/scripts...?idproduct=2080 Guess I had better get busy and start ordering and designing with this Cone Nozzle set. Thanks Carl and all at Semroc. James Pierson NAR# 7797 Last edited by James Pierson : 04-26-2009 at 04:40 PM. Reason: Lexia-Disa |
#32
|
||||
|
||||
Quote:
Oh, dear! More goodies to keep me busy. I'm already behind in ordering these new parts 'n pieces, and Carl just keeps adding more! Sigh... I'll never get caught up! What problems I have...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#33
|
||||
|
||||
That is pretty much what I was thinking of for the three pods on the Thunderbird 3...
|
#34
|
|||
|
|||
Quote:
Am I correct in assuming that's for the upcoming Orion?
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#35
|
||||
|
||||
Quote:
The BC-1315 is the correct one for the upcoming Orion. The original that Bob Craddock loaned me used the balsa cone and paper shroud. The instructions call for six BC-711 (BC-71) balsa nose cones and an errata sheet says they were replaced with plastic cones. They are a translucent white plastic not like any other cones I saw from Centuri. I was going to scan the older instructions, but my scanner went out before I was able to to it. The vacuform wraps are the same one-off from the Centuri Saturn V and 1B. We will probably use paper wraps and balsa fiddly-bits on ours.
__________________
Carl McLawhorn NAR#4717 L2 semroc.com |
#36
|
||||
|
||||
Upscale parts/decals
I agree, good stuff! Just very frustrating trying to find parts in local hobbie shop, along with decals. I plan on building the Bluebird Zero and the Maxi-force but, have yet to find decals. Someone did reply papatango would b open again in 3 days. Excelsior will b back eventually.
Any other sources for decals of OOP rockets ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|