#1
|
||||
|
||||
Laser Patterns For Models
I'm starting this thread for posting various patterns from models, such as fins and alignment guides, that need to be laser-cut. The process is to draw the outlines in Corel Draw 10 format, which is the language Carl's death ray speaks.
There are some basic requirements for the patterns, and I'll post a list soon, to open this up to everyone. Understand, this is not to suggest that SEMROC will produce all of these items just because they show up here. But it will make it easier for Carl to pull a pattern for something if someone wants it bad enough.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Estes MegaSizz #1998 - Fins, Fin Guides
To start this thread off, since there is a build thread in the "Projects" section for a classic original MegaSizz, I thought I'd work up a set for anyone wanting to clone the kit. There are three patterns requiring four total pieces - two identical 3" x 9.6" x 1/8" balsa sheets for the fins, and two 6" x 6" x 0.05" matteboard pieces for the guides.
The fin patterns are based on the existing plan scans found on YORP: Estes #1998 MegaSizz
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
Estes #1390 Aero-Fin - Fins
This is an odd-ball that did not remain in the catalog for very long. The fins are fragile, and the parachute can tangle easily. The original required you to cut the fins using a cardstock pattern, so the chances of getting two fins identical were remote at best.
Estes Aero-Fin Plans
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#4
|
|||
|
|||
good thread / idea.... wish I had Corel , I'd help out ...
do you take suggestions ? lol. Need to send a list to Carl anyways for 'wish list' . ( shgoing to start a new thread for 'wish list' ) < snippped and moved to new thread so as not to hijack this one > ~ AL |
#5
|
||||
|
||||
Estes #1937 Astro - Fins
Another from my personal "built once upon a time" collection. This is a really good flying rocket, and is very simple to build.
I'm calling out 3/32" sheet because my memory says they were thicker than a Wizard, which was 1/16" thick.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#6
|
||||
|
||||
Quote:
Thanks! Yes, as long as the fin pattern is available. Most of these being posted here initially are either those I personally built, or really drolled over in my "first BAR days"... Name yer poison!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#7
|
|||
|
|||
posted a new thread, but feel free to move here if deemed appropriate.
Neat you posted the Astro... that is one I need to build. Back in the day, I had the Sunbird, my brother had the Laser, and my cousin built the Astro, think we all got and built em together. I have already cloned the sunbird and Laser, although the inkjet decals for the Laser are too transparent .... Gordy, here is one for you - a Laser/ Sunbird/ Astro group set, like the mini brute sets.. I'd buy a set ~ AL |
#8
|
||||
|
||||
I'll try to get the Laser fins up tonight. This one is a "three-fer", since it was used for (at least) three rockets - Laser #1938, #1991 Zipper, and #1991 Blue Star. I'll also get the Sunbird up tonight. Those were among my personal "originals" 25+ years ago...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#9
|
|||
|
|||
Quote:
I believe the Laser,as you posted, uses the same fins as the Mini Mean Machine. but not certain,as I don't have the kits handy right now. That's one more thing for YORS... fin interchange list, maybe I'll work that up, anything like that posted ? ~ AL ( at my dad's bored,waiting for the Superbowl ) . |
#10
|
||||
|
||||
Estes #2028 Cajun - Fins
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|