The plans for the Estes Maverick (1904) up on oldrocketplans.com (http://www.oldrocketplans.com/estes/est1904/est1904.htm) don't give an indication of the fin thickness, nor the dimensions of either the complete sheet of fins (Estes BF-1904), or an actual fin.

My printout of the fin template has the root edge of the fins at 1 11/16" long (making the complete sheet of fins 1 3/8" x 8 13/16", and I'm guessing 3/32" thick.

Can someone put up a better scan of the fins (with a ruler next to it)?

Thanks!
Jim
.

__________________
.
.

Dreaming of making the rockets I dreamed of as a kid (and then some).

"The Guide says there is an art to flying", said Ford, "or rather a knack."
"The knack lies in learning how to throw yourself at the ground and miss."

Launching is Optional... Landing? That Depends on Trees.

Another option would be for someone to measure the fin's thickness and the root edge. With the image I printed today, I can use that to scale the fin properly.

Thanks!
Jim
.

__________________
.
.

Dreaming of making the rockets I dreamed of as a kid (and then some).

"The Guide says there is an art to flying", said Ford, "or rather a knack."
"The knack lies in learning how to throw yourself at the ground and miss."

Launching is Optional... Landing? That Depends on Trees.