#1
|
||||
|
||||
Fin Question...
Ok, I'm building a 4 inch 54mm mount model which will have four fins that are about 5x6 inches. My questions are 1. What thickness of fiberglass should I use and 2. Where is a good (cheap if possible) supplier?
Thanks!
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
#2
|
||||
|
||||
Public Missiles has some information on selecting which to use:
PML G-10 Rocket Fins Here are some other places to shop for G-10. https://giantleaprocketry.com/produ...nents_fins.aspx https://www.apogeerockets.com/Build...0tbk3avcmq3 32 http://www.asp-rocketry.com/ecommer...s.cfm?cat_id=68 Hope that helps. Mine came with my rocket kit. So haven't done any myself. Michael |
#3
|
||||
|
||||
Thanks! I'll check them out!
__________________
J. Stuart Powley NAR 29573 "Gravity is a harsh mistress." |
Thread Tools | Search this Thread |
Display Modes | |
|
|